Physical Performance Test or Measurement
Customize your policy alerts
Sign up for all american_specialty_health policy alerts
Know when american_specialty_health releases new policies or updates existing guidance.
Monitor payer policy activity
This policy governs coverage of physical performance tests and measurements, including Functional Capacity Evaluations, for neurological or musculoskeletal conditions and work-related functional limitations. It also identifies work-training services and quantitative muscle-testing devices that are not medically necessary or are considered experimental, investigational, or unproven.
No material clinical or coverage changes in this revision.
Coverage Criteria
Medically Necessary Functional Capacity Evaluation
Functional Capacity Evaluation (FCE) is considered medically necessary when ALL of the following criteria are met:
ALL of the following
- A written referral from a physician, carrier, or employer is forwarded to the evaluator, explicitly stating the purpose of the FCE, including clearly defined goals to guide test selection and reflecting one or more recognized applications of an FCE.
- The evaluation is designed to determine return-to-work capabilities following a defined injury or medically necessary rehabilitation.
- The evaluation is structured to answer specific question(s) about the worker's performance abilities, and those questions are addressed in the evaluation report.
- Reported results are compared with meaningful standardized or normative data.
- The FCE is performed in its entirety by a qualified provider/evaluator meeting the requirements below.
- Before the FCE, the qualified evaluator obtains a subjective pain assessment, including the patient's self-reported effect on functional abilities and activities of daily living; performs a screening examination; and obtains informed consent.
- The referral source and evaluator access and review relevant medical records, work-related duties, prior attempts to return to work or prior FCEs and reasons for failure, and identify return-to-work goals and potential options in advance.
- Relevant comorbidities and their influence on the FCE and return to work are considered.
- Results are relevant to and comparable with the physical demands of the identified job, when a job is identified.
- A written report is submitted with patient demographics including work history; indication for evaluation; type of evaluation performed; raw and tabulated data; normative data values; comparison of test results with normative data for the FCE employed; and a narrative coversheet describing evaluation results and recommendations.
Not Medically Necessary Services
The following services are considered not medically necessary because they are nonmedical, educational, or training in nature:
ANY of the following
- Vocational rehabilitation programs and any program with the primary goal of returning an individual to work.
- Work-hardening programs.
- CPT 97537: Community/work reintegration training, including shopping, transportation, money management, avocational activities, work-environment or modification analysis, work-task analysis, or use of assistive technology/adaptive equipment, direct one-on-one contact, each 15 minutes.
- CPT 97545: Work hardening/conditioning; initial 2 hours.
- CPT 97546: Work hardening/conditioning; each additional hour.
Experimental, Investigational, or Unproven Testing
The following technology is considered experimental, investigational, or unproven:
ANY of the following
- Quantitative, including isokinetic, muscle-testing devices used for assessment of muscle strength, including MedX, Isostation B-200, Cybex II, Kin-Com, and Biodex.
Functional Capacity Evaluation Preparation
The following preparation and operational elements are required to support performance and interpretation of an FCE:
ALL of the following
- Before the FCE, a written referral from a physician, carrier, or employer is forwarded to the evaluator. The referral explicitly states the purpose of the FCE, provides clearly defined goals to guide test selection, and reflects one or more applications of an FCE.
- The referral source and evaluator review relevant medical records, work-related duties, prior attempts to return to work or prior FCEs and reasons for failure, and identify return-to-work goals and potential options in advance.
- Relevant comorbidities and their influence on the FCE and return to work are considered.
- The evaluator obtains a subjective pain assessment, including self-reported effects on functional abilities and activities of daily living.
- The evaluator performs a screening examination.
- The evaluator obtains informed consent.
- The evaluator documents patient demographics including work history, indication for evaluation, type of evaluation performed, raw and tabulated data, normative data values, and comparison of test results with normative data for the FCE employed.
- A narrative coversheet at the beginning of the report describes the evaluation results and recommendations.
- Where relevant, the detailed report includes results of the subjective interview; self-reported disability measures; physical examination or screening; behavioral aspects including pain behavior and effort; pace of work; clinical observations including body mechanics; and functional abilities for the assessed physical demands.
FCE Evaluator Qualifications
The FCE evaluator must meet ALL of the following qualifications:
ALL of the following
- The FCE is performed in its entirety by a physical therapist or occupational therapist currently holding a valid license, or by another licensed provider qualified within the provider's scope of practice.
- The evaluator has education, training, and competencies applicable to performance of FCEs.
- Competency is evidenced by certification when certification is required for the specific FCE system being used.
- The evaluator has satisfactorily performed a minimum of five FCEs.
- Proof of competency is available for review, which may include review by the Credentialing and Risk Management Committee of a sample of previously completed FCE reports.
Code 97750 Reporting Criteria
Because CPT 97750 is time-based, all three required time elements must be documented to determine the units reported:
ALL of the following
- Total time spent with the patient providing the test and measurement, including time spent preparing the patient for the test and measurement procedure.
- Time spent performing the selected protocol.
- Time spent with the patient providing post-testing instructions.
Physical performance testing or measurement may be reasonable and necessary when there is a need to evaluate a patient's ability to perform specific tasks, including for neurological or musculoskeletal conditions. These services are not to be used in lieu of evaluation or re-evaluation services, and it is not appropriate to report a code from the 95851-95852 series in addition to CPT 97750. It is not medically reasonable and necessary to bill physical performance testing as part of a routine assessment or evaluation of rehabilitation services. Direct one-on-one patient contact is required.
Quantitative muscle-testing or isokinetic devices used as therapeutic exercise are considered a form of therapeutic exercise. Use of the CPT codes specified in this guideline is not appropriate when these devices are used for therapeutic exercise rather than testing and evaluation.
Quantitative muscle testing or isokinetic devices, including devices such as MedX, Isostation B-200, Biodex, or Kin-Com, may not be reported with physical performance testing codes when the service is being provided as therapeutic exercise or when the device is used only to track improvements, muscle-strength ratios, or exercise progress rather than to perform a covered testing and evaluation service.
Vocational rehabilitation programs and programs with the primary goal of returning an individual to work are not considered medically necessary.
Work-hardening programs are considered nonmedical, educational, or training services and are not medically necessary.
Coding and Service Parameters
| 97750 | Physical performance test or measurement (eg, musculoskeletal, functional capacity), with written report, each 15 minutes |
| 97537 | Community/work reintegration training (eg, shopping, transportation, money management, avocational activities and/or work environment/modification analysis, work task analysis, use of assistive technology device/adaptive equipment), direct one-on-one contact, each 15 minutes |
| 97545 | Work hardening/conditioning; initial 2 hours |
| 97546 | Work hardening/conditioning; each additional hour (List separately in addition to code for primary procedure) |
| 95851-95852 | Code series that should not be reported in addition to 97750 |
| 97750 | Description not stated in this document window; identified as a time-based test or measurement procedure. |
Provider Documentation and Billing Actions
Obtain a Written FCE Referral
Before the FCE, obtain and retain a written referral from a physician, carrier, or employer. The referral must state the FCE purpose explicitly, define goals that guide test selection, and identify the applicable performance or return-to-work question.
- Review relevant medical records, work duties, prior return-to-work attempts or FCEs and reasons for failure.
- Identify return-to-work goals and potential options in advance, and consider comorbidities and their effect on the FCE and return to work.
Document Referral and Evaluation Purpose
Maintain documentation showing that the FCE is designed to assess return-to-work capabilities after a defined injury or medically necessary rehabilitation and is structured to answer specific questions about the worker’s performance abilities. Address those questions in the evaluation report and compare results with meaningful standardized norms.
- The evaluation should reflect one or more recognized FCE applications and have clearly defined goals.
- An FCE is typically not indicated before three months post-injury unless a significant documented change justifies earlier evaluation.
- FCEs are generally limited to 2–4 hours per date of service and one evaluation every 12 months when necessary; earlier repeat evaluations are reviewed individually using objective data compared with standardized norms.
Report Results Against Standardized Norms
Provide direct one-on-one patient contact and a written report that compares results with meaningful, applicable standardized norms. Results should be relevant to and comparable with the physical demands of the identified job.
- Submit a written report with patient demographics and work history, indication for evaluation, type of evaluation, raw and tabulated data, normative data values, and a narrative coversheet describing results and recommendations.
- Include direct patient contact for physical performance testing; do not use testing in lieu of evaluation or re-evaluation services or as part of a routine rehabilitation assessment.
- Compare test results with the normative data for the FCE employed.
Complete the Pre-FCE Assessment
Before testing, document a subjective pain assessment, the patient’s self-reported functional and activities-of-daily-living effects, a screening examination, and informed consent.
- Record pain and its effect on functional abilities and activities of daily living.
- Complete and document the required screening examination before the FCE.
- Obtain and document informed consent.
Verify Evaluator Qualifications
Perform the FCE in its entirety through a currently licensed physical or occupational therapist or another licensed provider qualified by scope of practice. Document the evaluator’s education, training, competencies, any FCE-system-specific certification requirements, and relevant experience.
- Maintain evidence of satisfactory performance of at least five FCEs.
- Competency evidence may include review by the Credentialing and Risk Management Committee of previously completed FCE reports.
Document FCE Setting and Equipment
Use a setting and equipment that appropriately reflect the work duties being assessed, with relevant tests, normative standards, acceptable reliability and validity, suitable space, and documented maintenance and calibration. Ensure the evaluator understands the equipment and that emergency planning, facilities, and equipment are available.
- Document equipment training when necessary.
- Select comprehensive functional activities related to work duties; isometric or isokinetic extremity or trunk torque testing alone is insufficient.
Document Safety Procedures
Document safety planning and prevention of further injury throughout the FCE. Use professional judgment to establish a safe maximum level for each test, monitor cardiovascular response, and apply predefined test-cessation procedures.
- Communicate risks and contraindications and focus testing on critical job demands.
- Modify or stop the FCE when heart rate, blood pressure, or respiratory rate changes excessively.
- Establish criteria for stopping, including pain, nausea, dizziness, blurred vision, radicular symptoms, or continued unsafe body mechanics.
Document Required 97750 Time
For CPT 97750, document all time-based elements needed to support the reported units. Direct patient-contact time determines the number of units, including preparation, selected testing, and post-testing instructions.
- Record total time with the patient providing the test and measurement, including preparation.
- Record time performing the selected protocol.
- Record time with the patient providing post-testing instructions.
Include Required FCE Report Contents
Maintain a complete written FCE report supporting the billed service and clinical conclusions. Document the problem requiring the test, the specific tests and protocols performed, a separate measurement report, and how the findings affect functional activity and the plan of care.
- Include patient demographics and work history, indication, evaluation type, raw and tabulated data, normative values, results, and recommendations.
- Include graphic reports and interpretation of collected data when applicable.
- Explain the effect on discharge, return to sport or activities of daily living, or treatment modification.
Document Additional FCE Clinical Details
Where relevant, expand the FCE report beyond the core required elements to capture clinical and functional context supporting the conclusions.
- Include the subjective interview and self-reported disability measures.
- Document physical examination or screening results, pain behavior and effort, pace of work, clinical observations including body mechanics, and functional abilities for the assessed physical demands.
Avoid Noncovered or Improper Billing
Claims may be denied when the diagnosis or condition is not covered, when the submission lacks a covered purpose or code, or when testing is billed inconsistently with the policy. Use the most appropriate codes in effect on the submission date and support the service with the required documentation.
Work-Training Services Are Not Medically Necessary
Treat vocational rehabilitation programs, programs whose primary goal is returning an individual to work, work reintegration training, and work-hardening or conditioning as educational or training services that are not medically necessary under this policy.
Quantitative Muscle-Testing Devices
Do not represent quantitative or isokinetic muscle-testing devices as covered FCE services when used for muscle-strength assessment; these devices are considered experimental, investigational, or unproven under the policy.
- Examples include MedX, Isostation B-200, Cybex II, Kin-Com, and Biodex.
- Evidence does not establish better diagnostic utility than established manual muscle testing for these devices.
FCE Criteria Must Be Met
An FCE does not meet policy criteria when required referral, purpose, return-to-work application, specific performance question, standardized comparison, qualified evaluator, or pre-FCE requirements are absent.
- The referral must be written, explicitly state the purpose, and define goals guiding test selection.
- The report must address the specific performance question and compare results with meaningful standardized norms.
- Document the qualified evaluator, pain and functional assessment, screening examination, and informed consent.
Do Not Bill Testing Codes for Therapeutic Exercise
Do not bill physical performance testing codes for quantitative muscle-testing or isokinetic devices when the devices are being used therapeutically as exercise or strengthening tools. The codes in this guideline apply to testing and evaluation, not therapeutic exercise.
- Therapeutic use includes strengthening, conditioning, or tracking improvement over time.
- Examples include MedX, Isostation B-200, Biodex, and Kin-Com used as therapeutic exercise.
Support 97750 With Complete Test Documentation
Unsupported claims for CPT 97750 may result when documentation does not establish the required time, protocol, problem, specific testing, measurement report, interpretation, or patient-contact elements.
- Document total patient-contact time, preparation, protocol time, and post-testing instructions.
- Identify the problem requiring the test and the specific test performed.
- Include a separate measurement report with relevant graphics and interpretation, functional application, and impact on the plan of care.
Support the FCE With Complete Documentation
An FCE is at risk of denial or non-support when the written referral, explicit purpose and goals, evaluation question, standardized comparison, qualified-provider documentation, pre-FCE assessment, or required written report is missing.
- Retain the referral and supporting records reviewed before testing.
- Ensure the report contains required demographics, work history, indication, evaluation type, raw and tabulated data, normative data, results, and recommendations.
- Include relevant interview, disability, screening, behavioral, pace, body-mechanics, and functional-demand details.
Background
Physical performance testing evaluates the ability to perform specific tasks and may be reasonable and necessary for patients with neurological or musculoskeletal conditions. Testing may include functional capacity testing, balance measures, isokinetic performance, standardized testing batteries, or a six-minute walk test. A Functional Capacity Evaluation (FCE) provides an objective assessment of work-related functional abilities and can help relate a medically stable individual's limitations to essential job demands and return-to-work planning. Physical performance testing is not a substitute for a rehabilitation evaluation or re-evaluation.
Definitions
OpenPayer is powered by Trek Health's payer performance platform. Trek continuously ingests, validates, and normalizes Transparency in Coverage data alongside payer policies and other commercial payer data to create a structured payer intelligence foundation. OpenPayer uses this foundation to deliver personalized search results, dynamically generated policy pages, and tailored policy monitoring based on each user's payers, specialties, billing codes, and areas of interest. The same intelligence powers broader payer performance workflows, including reimbursement benchmarking, contract evaluation, payer negotiations, and financial decision-making.